Minimal Lubrication
Minimal lubrication for customer-specific dry processing
Inner minimal lubrication
An aerosol is produced inside the reservoir of minimal lubrication units and then transported to tools via rotation spindle. If optimally adjusted, the dosing oil is completely spend on lubrication without any arrears.
Outer minimal lubrication
Compressed air atomizes the dosed lubricant inside the spray nozzles. Without fog, micro drops are generated and delivered to friction points via carrying air.
Advantages of minimal lubrication
- Omission of cooling lubricant
- Omission of work piece cleaning
- Significant improvement of production time (30-50%)
- Up to 56% less contamination of ambient air
- No disposal costs for swarf and cooling lubricant
- Higher cutting capacity
- Longer tool life of up to 300%
- Reliable control of production process
- Parallel application of wet and dry processing
- Omission of tools machine components like lubricant filters and processing plants
- Better surface qualities
Vogel Electro-magnetic pump - compact unit - 3 l reservoir
- Electro-magnetic pump PEP with tank
- Suitable for supplying oil to chains with lubricating brushes
- For oils with an effective viscosity up to 1000 mm²/s
- Flow rates: 20, 40 or 60 mm per stroke and outlet
Shipping time: 4 Weeks
Vogel Oil+air unit - compact unit - high efficiency
- Oil+air unit OLA04
- Better operational safety
- Continuous supply with the correct amount of fresh lubricant
- Less lubricant for more safety and environmental protection
Shipping time: 4 Weeks
Brush unit - compact unit - 15 to 60°C
- Brush unit BR
- Suitable for chain lubrication
- Voltage: 230/400 volt
- Speed: 1-500 min-1/s
- Operating temperature: 15 to 60°C
Shipping time: 4 Weeks
Spray mist pump - compact unit - 30 l/min.
- Spray mist pump
- Suitable for oil, water, etc.
- Air consumption: 30 litre per minute and per nozzle assembly
- Max. input pressure: 9 bar
- Max. operating pressure: 1 to 3 bar
Shipping time: 2 Weeks
External minimal lubrication - compact unit - 50 Nl/min.
- External minimum lubrication Basic
- Suitable for universal milling machines and for external lubrication
- Fill volume: 3 litre
- Number of outlets: 1-8
- Air consumption per outlet: 50 Nl/min.
Shipping time: 1-3 Days
External minimum lubrication - compact unit
- External minimum lubrication Smart
- Fill volume: 0,3, 0,5 or 0,8 litre
- Incl. lubricant reservoir
- Incl. mixture regulation units
- Incl. lubricant lines with spray nozzle
Shipping time: 1-3 Days
Vogel Electro-magnetic pump - compact unit - outlets: 1, 2 or 3
- Electro-magnetic pump PEP
- Suitable for oil supply of chains with lubricating brushes
- Suitable for oils with effective viscosities up to 1000 mm²/s
- Flow rate: 20, 40 or 60 mm per stroke and outlet
Shipping time: 4 Weeks
SKF Electro-magnetic pump - compact unit - 2, 3, 4 or 6 outlets
- Electro-magnetic pump PE
- For oils with effective viscosities up to 1000 mm²/s
- Flow rates: 20, 40 or 60 mm³ per stroke and outlet
- Lubricant outlets: 2, 3, 4 or 6
Shipping time: 4 Weeks
Chain lubrication unit - compact unit - made of steel
- Suitable for chain lubrication with oil
- Max. flow rate: 1,2 litre per minute
- Tank volume: 4 litre
- Voltage: 230/400 volt / 260/460 volt
- Frequency: 50 Hz / 60 Hz
Shipping time: 2 Weeks
Chain lubrication unit - compact unit - 1.2 l/min.
- Chain lubrication unit WSE-12
- Suitable for chain lubrication with oil
- Max. flow rate: 1,2 litre per minute
- Voltage: 230/400 volt / 260/460 volt
- Tank volume: 12 litre
Shipping time: 2 Weeks
Vogel Oil-air lubrication - compact unit - incl. control - incl. filter
- Oil-air lubrication OLA-11 with control
- Compact unit
- Mounted on distributor plate
- Incl. pump
- Incl. mixing jets
Shipping time: 4 Weeks
Oil-air lubrication - compact unit - incl. control - incl. mixing jets
- Oil-air lubrication with control
- Fully mounted onto distributor plate
- Incl. pump
- Incl. mixing jets
- Incl. integrated control
Shipping time: 4 Weeks
SKF Chain lubrication unit - compact unit - 60 mm³/stroke
- Chain lubrication system CL
- Central lubrication unit
- Outlets: 4
- Flow rate: 60 mm³ per stroke and outlet
- Voltage: 230 volt
Shipping time: 1-3 Days
Vogel Lubrication unit for linear guidings - compact unit - max. 25 bar
- Lubrication unit for linear guidings
- Flow rate: 10, 15 or 20 mm³/stroke
- Max. counter pressure: 25 bar
- Temperature: +15°
Shipping time: 4 Weeks
Compressed air grease press - incl. nozzle pipe - one-handed
- One-hand compressed air grease press
- For grease up to NLGI class II DIN 51818
- Max. flow rate: 1 ccm/stroke
- Ratio: 1:60
- Max. operating pressure: 480 bar
- Incl. nozzle pipe, connection: M10x1
Shipping time: 2 Weeks
Compressed air grease press - incl. pipe - one-handed
- One-hand compressed air grease press
- For grease up to NLGI class II DIN 51818
- Max. flow rate: 1 ccm/stroke
- Ratio: 1:60
- Max. operating pressure: 480 bar
- Incl. pipe, connection: M10x1
Shipping time: 2 Weeks
Grease sprayer - compressed air
- Compressed air sprayer
- For grease
- For spraying grease directly from the cartridge (without propellant or other chemical additives)
- Nearly unlimited application variety
Shipping time: 2 Weeks
Show 1 to 17 (of in total 17 products) | Sites: 1 |