Pump Elements
Pump elements are either available with spring centred piston or with force centred piston. They deliver lubricant via lubrication lines to lubricating points or additional distributors. We offer pump elements with flow rates ranging from 0,8 to 5,0 cm³/min.
Pump elements with spring centred piston are most commonly used in various systems. Pump elements with force centred pistons are suitable for applications with very cold ambient temperatures of up to -30°C or for highly viscous lubricants.
The KFG pump unit can be fitted with up to three pump elements either left, right or in front. Pump elements have a lubricant outlet with M15x1,5 inner thread to connect lubricant lines or valves with the lubrication system. If no pump element is used, the remaining outlets have to be tightly closed with screws at the pump unit's casing.
Pump elements - PE-5, PE-10, PE-15, PE-25, PE-50
- Pump element PE-5
- For Taro pumps
- For oil and grease up to NLGI class 2
- Max. operating pressure: 200 bar
- Without pressure control valve
Pump elements - PE-60, PE-120, PE-170 excl. PCV
- Operating pressure: max. 350 bar
- Oil and grease up to NLGI class 2
- Pipe connections: Ø 6 to G 1/4
Pump element - PE-60F
- Dosage volume: 0,06 cm³/stroke
- Operating pressure: max. 350 bar
- Pipe connections: Ø 6 to G1/4
Pump element - PE-60, PE-120, PE-170 incl. PCV
- Operating pressure: max. 350 bar
- Pressure control valve (PCV): 280 bar
- Pipe connections: Ø 6 to Ø 10
Pump element - PE-120F
- Dosage volume: 0,12 cm³/stroke
- Operating pressure: max. 350 bar
- Pressure control valve: 280 bar
Pump element - PE-120 V - adjustable
- Operating pressure: max. 350 bar
- Pressure control valve: 280 bar
- Pipe connections: Ø 6 to G1/4
Pump element - PE-120FV
- Dosage volume: 0,04 cm³ to 0,12 cm³/stroke
- Operating pressure: max. 350 bar
- Pressure control valve: 280 bar
Pump element - PE-560 V
- Pump element PE-560 V
- Dosage: 0,2 cm³ - 0,56 cm³/stroke
- Oil and grease up to NLGI class 2
- Without pressure control valve
- Pipe connections: Ø 6 to Ø 10
Vogel Pump elements - KFA1 series
- Pump element
- For KFA and KFB pumps
- Dosage: 1, 1.5 or 2 ccm per minute
SKF Pump element - KFG series
- KFG1.U4 - 0,8 ccm (4 notches)
- KFG1.U3 - 1,3 ccm (3 notches)
- KFG1.U2 - 1,8 ccm (2 notches)
- KFG1.U1 - 2,5 ccm (1 notch)
- KFG1.U0 - 6,0 ccm (no notch)
Pump element - Multiport
- Pump element
- For Multiport progressive pumps
- Dosage: 0,12 ccm
Vogel Pump element - 24-1557-3681
For multi line pump units FF from SKF / Vogel
Vogel Pressure control valve - PCV - for progressive pump with Ø 6, 8, 10 mm
- Opening pressure: 200 -/ 300 ± 20 bar
- For Ø 6-, 8-, 10 mm
| Show 1 to 14 (of in total 14 products) | Sites: 1 |