Micro Pumps
| To transport and dose lubrication, injections pumps and micro pumps are suitable, which you can find in this section. To have the lowest amount of dosage one should choose the piston pumps. The adjustability of the unit's flow rate can be partially chosen. The usage of injection lubricators and micro pumps totals of chain lubrication, oil spraying and lubrication of small components. The most advantage of the injection lubricators is the precisely dosage of every single lubricating point, irrespective of size or diameters. The supply of lubricant is carried out from a central reservoir for injection lubricators also via central pressure oil pipe.One can choose between single dosing elements or group eements. Due to no oil contermination to the air, the micro pumps and injections are very environmental friendly. | .jpg) |
Vogel Injection lubricator - 1-port - 0,003-0,03 cm³/stroke
- Max. flow rate: 0,003-0,03 cm³/stroke
- Ambient temperature: -20°C to +80°C
- Lubricant: Oil
- Max. flow rate at 6 bar: 200 l/min
- Basis unit for injection lubricators with reservoir
- Pipe, diameter: 2,5 mm or 4 mm
Shipping time: 2 Weeks
Vogel Injection lubricator - 1-port - with lateral connection
- Max. flow rate: 0,003-0,03 cm³/stroke
- Ambient temperature: -20°C to +80°C
- Lubricant: Oil
- Operating viscosity: 10 to 1100 mm²/s
- Sealing: NBR
- Pipe, diameter: 2,5 mm
Shipping time: 2 Weeks
SKF Injection lubricator - 1-port - incl. reservoir
- Injection lubricator with reservoir
- Suitable for tool lubrication
- Reservoir volume: 0,25 litre
- Reservoir made of PA6-3-T
- Operating viscosity: 10 to 1100 mm²/s
- Compressed air connection: 3 to 10 bar
Shipping time: 2 Weeks
Vogel Injection lubricator - 3-port - 0,003-0,03 cm³/stroke
- Ambient temperature: -20°C to +80°C
- Lubricant: Oil
- Operating viscosity: 10 to 1100 mm²/s
- Pumping medium: Compressed air
- Compressed air connection: 3 to 10 bar
- Max. flow rate at 6 bar: 200 l/min
Shipping time: 2 Weeks
Vogel Injection lubricator - 3-port - incl. piston monitoring
- Ambient temperature: -20°C to +80°C
- Lubricant: Oil
- Operating viscosity: 10 to 1100 mm²/s
- Pumping medium: Compressed air
- Compressed air connection: 3 to 10 bar
- Max. flow rate at 6 bar: 200 l/min
Shipping time: 2 Weeks
SKF Injection lubricator - 3-port - incl. reservoir
- Injection lubricator with reservoir
- Suitable for tool lubrication
- Reservoir volume: 0,25 litre
- Reservoir made of PA6-3-T
- Operating viscosity: 10 to 1100 mm²/s
- Compress air connection: 3 to 10 bar
Shipping time: 2 Weeks
SKF Micro pump - baseplate - 3-30 mm³ - max. viscosity: 400 mm²/s
- Micro pump mounted on baseplate
- Mounting of 1- 4 pumps possible
- Set dosing via setting rings: 3, 5, 10 and 30 mm
- Frequency: max. 3 Hz
- Max. delivery pressure: 35 bar
- Pumping medium: Mineral oils without additives
Shipping time: 2 Weeks
Vogel Vectoclub - 230V - 7 to 30 mm³ - micro pump
- Flow rate adjustable: 7 to 30 mm³
- Air consumption: 400 l/min.
- For viscosities of 10 to 400 mm²/s
- Operating temperature: 10°C to 50°C
- With electronic pulse generator
- Reservoir: 0,3 litre
Shipping time: 1-3 Days
Vogel Integrated grease relubrication - 24 volt DC - micro pump
- Integrated grease relubrication
- Flow rate: 6 mm³/stroke
- Operating temperature: +15°C to +50°C
- Voltage: 24 volt DC
- Lubricant: Grease, NLGI class 2
Shipping time: 1 Week
Vogel PVR-003-MOD - freely variable - 0-30 mm³ - micro pump
- Dosage infinitely variable
- Dosing volume: 0 - 30 mm³
- Air pressure: 4 - 8 bar
- Ambient temperature: -20°C to +70°C
- Operating temperature: +10°C to +70°C
- Delivery pressure: max. 35 bar
Shipping time: 2 Weeks
Vogel Injection lubricator coupling set
- Coupling set
- For injection lubricators
- Incl. 2 round sealing rings
Shipping time: 1 Week
| Show 1 to 11 (of in total 11 products) | Sites: 1 |