Pneumatic Pumps
.jpg)
Our vast variety of manually or pneumatically operated piston and pneumatic pumps are suitable for lubrication with oil, semi-fluid grease and grease. Depending on model, the max. flow volume per stroke can amount to up to 50 cm³ per stroke. The pumps and pump units are available with reservoir volumes ranging from 0,5 to 5,0 liter.
Commissioning
The pump or pump unit's reservoir is filled with respective lubricant (either oil, semi-fluid grease or grease). The pump is then activated in intervals of 5-10 seconds until lubricant emits from all lubricatin points to ensure correct function of the pump as well as safety and tightness of all lubrication lines inside the system.
Maintenance
Regularly, the fill level of reservoirs has to be controlled and, if necessary, the reservoirs have to be refilled. Only lubricant that meets the pump unit's manufacturers stated qualities should be used. Oil should only be refilled with a sieve filter to avoid particles inside the lubrication system. After long machine operation time, the complete system should be thourougly controlled for tightness and secure connections. After maintenance is completed, the pump or pump unit should be activated multiple times to control if all lubricating points emit sufficient quantities of lubricant.
Vogel Pneumatic pump - PEF-90
- Pneumatic pump PEF-90
- For semi-fluid grease (NLGI class 000, 00)
- Reservoir volume: 3 litre
- Pressure: 6 - 10 bar
- Flow rate 48 cm³/stroke
- Without cotrol unit
Shipping time: 3-4 Weeks
SKF Pneumatic pump - PEF-90-S14 - incl. control
- Pneumatic pump PEF-90
- For semi-fluid grease (NLGI class 000, 00)
- Reservoir: 3 litre
- Dosage: 48cm³ per stroke
- Pressure: 6 - 10 bar
- Incl. integrated control unit IG 476
Shipping time: 3-4 Weeks
Vogel Pneumatic pump - PW-289 - oil
- Flow rate 10 cm³/stroke
- Pressure: 3,5 - 10 bar
- Ratio: 4,9 : 1
- Reservoir volume: 1,5 litre
- Outlet pressure max. 40 bar
- For oil
Shipping time: 3-4 Weeks
SKF Pneumatic pump - PF-289 - grease
- Grease, NLGI-class 000, 00
- Flow rate 10 cm³/stroke
- Pressure: 3,5 - 10 bar
- Ratio: 4,9 : 1
- Reservoir volume: 1,5 litre
- Outlet pressure max. 45 bar
Shipping time: 3-4 Weeks
Vogel Pneumatic pump - POEP 15 - oil
- Reservoir volume: 0,5, 1,0 and 1,7 litre
- Flow rate: 15 cm³/stroke
- Pressure max. 60 bar
- Medium: Oil
- Over pressure valve
Shipping time: 3-4 Weeks
Vogel Pneumatic pump - PFEP 15 - semi-fluid grease
- Reservoir volume: 0,5, 1,0 and 1,7 litre
- Flow rate: 15cm³/stroke
- Pressure max. 60 bar
- Medium: semi-fluid grease
- Over pressure valve
Shipping time: 3-4 Weeks
Vogel Piston pump - PEF-99W
- Piston pump PEF-99W
- For semi-fluid grease class 000, 00
- Flow rate: 50 ccm/stroke
- Reservoir volume: 3 litre
- Max. air input pressure: 10 bar
- Incl. level switch
Shipping time: 3-4 Weeks
Pneumatic pump - TBD
- Pneumatic pump TBD
- Reservoir: 1,6 to 4,0 litre
- Outlets: 1, 2, 4, 5, 6, 8 or 9
- Dosage: 0,5 cm³ per stroke
- Max. pressure: 100 bar
- Ratio: 16 : 1
Shipping time: 3-4 Weeks
SKF Piston pump - PPU-5 / PHU-5
- Piston pump PPU-5 / PHU-5
- For oil or grease (up to NLGI class II)
- Dosage: 0,1 - 0,5 cm³/stroke
- Pressure: 4,5 - 10 bar
- Outlet pressure: 160 bar
- Ratio: 1 : 28
Shipping time: 3-4 Weeks
SKF Piston pump - PPU-35 / PHU-35
- Piston pump PPU-35 / PHU-35
- For oil or grease (up to NLGI class II)
- Dosage: 0,7 - 3,5 cm³ pro stroke
- Pressure: 4,5 - 10 bar
- Max. outlet pressure: 160 bar
- Ratio: 1 : 28
Shipping time: 3-4 Weeks
Vogel Piston pump - PPU-35-5 / PHU-35-5
- Piston pump PPU-35-5 / PHU-35-5
- For oil or grease up to NLGI class 2
- Outlet pressure: max. 160 bar
- Ratio: 1 : 25
- Pressure: 4,5 - 10 bar
- Flow rate: 0,7 - 3,5 ccm/stroke
- Reservoir: 2,5 or 5,0 kg
Shipping time: 3-4 Weeks
Vogel Piston pump - PPU-5-5 / PHU-5-5
- Piston pump PPU-5-5 / PHU-5-5
- For oil or grease up to NLGI class 2
- Outlet pressure: max. 160 bar
- Ratio: 1:28
- Pressure: 4,5 - 10 bar
- Flow rate: 0,1 to 0,5 cm/stroke
- Reservoir: 2,5 or 5,0 kg
Shipping time: 3-4 Weeks
SKF Piston pump - PFH-23 / PFP-23
- For grease up to NLGI class 2
- Outlet pressure max. 200 bar
- Reservoir made of acryl glass
- Volume: 1,5 kg
- Outlets: 1
- Flow rate: 2,5 ccm
- Temperature: -10 to +60°C
Shipping time: 3-4 Weeks
Piston pump- excl. relief valve - 0.1 ccm/stroke
- Piston pump without relief valve
- Lubricant: Oil
- Delivery volume: 0.1 ccm/stroke
- Max. counter pressure: 40 bar
- Strokes: 10 - 300 min.
- Suction height: 200 mm
Shipping time: 3-4 Weeks
Piston pump - incl. relief valve - 1,1 ccm/stroke
- Piston pump with relief valve
- For oil
- Delivery volume: 1,1 cm³/stroke
- Max. counter pressure: 20 bar
- Strokes: 10 - 60 min.
- Suction height: 1500 mm
Shipping time: 3-4 Weeks
Pneumatic pump - P5.1,2 / P8.1,2
- For oil or semi-fluid grease
- Reservoir: 1,2 litre
- Dosage: 10 or 15 cm³/stroke
- Actuator volume: P5=275 cm³, P8=550 cm³
- Actuator pressure: 4 - 8 bar
- Ratio: 1:11 or 1:8
Shipping time: 3-4 Weeks
Pneumatic pump - P5
- For oil
- Reservoir made of plastic
- Reservoir: 2, 4.2 or 8 litre
- Flow rate: 10, 15, 30 or 50 cm³
- Actuator pressure: 5 - 10 bar
- Actuation via 3/2 way valve
Shipping time: 3-4 Weeks
SKF Pneumatic single line pumps - P-86-BW7
- With metal reservoir
- For circular lubrication
- As complete lubrication system
- For oil
- 6,0 litre volume
- Control via air pressure
Shipping time: 3-4 Weeks
Pneumatic pump - P30-6 - oil
- Flow rate: 30cm³/stroke or 50cm³/stroke
- Air input pressure: 5-10bar
- Pressure ratio: 1:9
- Actuator pressure: 5-10 bar
- Reservoir volume: 6 litre
- Reservoir made of sheet steel
Shipping time: 3-4 Weeks
Pneumatic pump - P30 / P50
- For oil or semi-fluid grease
- Flow rate: 30 cm³/stroke or 50 cm³/stroke
- Pressure ratio: 1:9
- Actuator pressure: 5 - 10 bar
- Actuator volume: P30 = 300cm³, P50 = 550cm³
- Operating temperature: max. 70°C
Shipping time: 3-4 Weeks
Pneumatic pump - P5.2 / P8.4 / P8.8
- For oil or semi-fluid grease
- Flow rate: 10cm³/stroke or 15cm³/stroke
- Pressure ratio: 1:11 or 1:8
- Actuator pressure: 4-8 bar
- Actuator volume: P5 = 275cm³, P8 = 550cm³
- Reservoir volume: 2, 4.2 or 8 litre
Shipping time: 3-4 Weeks
Pneumatic pump - P605
- Pneumatic pump P605
- For oil or semi-fluid grease
- Flow rate: 3cm³/stroke, 9,5cm³/stroke or 15cm³/stroke
- Pressure ratio: 1:32, 1:23 or 1:8
- Actuator pressure: 3-8 bar
- Operating temperature: max. 70°C
Shipping time: 3-4 Weeks
Pneumatic pump - 2564
- Flow rate: 30 / 50 cm³/stroke
- Air input pressure: 5-10bar
- Air pressure ratio: 9:1
- Oil pressure: max. 36 bar
- Reservoir volume: 2,7 litre
- Plastic reservoir
Shipping time: 3-4 Weeks
Piston pump - excl. relief valve - 1.6 ccm/stroke
- Piston pump without relief valve
- Lubricant: Oil
- Delivery volume: 1.6 ccm/stroke
- Max. counter pressure: 20 bar
- Strokes: 10 - 200 min.
- Suction height: 1500 mm
Shipping time: 3-4 Weeks
Pneumatic pump - P30.2 - P50.8
- For oil or semi-fluid grease
- Flow rate: 30cm³/stroke or 50cm³/stroke
- Pressure ratio: 1:9
- Actuation pressure: 5-10 bar
- Actuation volume: P30 = 300cm³, P50 = 550cm³
- Reservoir volume: 2.0 / 4.2 or 8.0 litre
Shipping time: 3-4 Weeks
Pneumatic pump - P5.6 / P8.6
- For oil or semi-fluid grease
- Reservoir volume: 6 litre
- Flow rate: 10cm³/stroke or 15cm³/stroke
- Actuation volume: P5=275cm³, P8=550cm³
- Actuation pressure: 4-8 bar
- Pressure ratio: 1:11 or 1:8
Shipping time: 3-4 Weeks
Hydraulic pump - PH1-6 / PH6-6 / PH10-6
- For oil or semi-fluid grease
- Reservoir volume: 6 litre
- Flow rate: PH1:1cm³/stroke, PH6:6cm³/stroke, PH10:10cm³/stroke
- Actuation pressure: 22 - 200 bar
- Pressure ratio: PH1:1:2, PH6:1:2, PH10 1:1
Shipping time: 3-4 Weeks
Hydraulic pump - PH1 / PH6 / PH10
- For oil or semi-fluid grease
- Flow rate: PH1:1cm³/stroke, PH6 6cm³/stroke, PH10:10cm³/stroke
- Per. actuation pressure: max. 55 bar
- Actuation pressure: 22 - 200 bar
- Pressure ratio: PH1:1:2, PH6:1:2, PH10:1:1
Shipping time: 3-4 Weeks
Pneumatic pump - PP-1
- Pneumatic actuation
- Reservoir: 1.9, 2.5, 4.2, 8 kg
- Flow rate: 0,06 to 0,17 cm³
- Pump element: PE 120 volt
- Reservoir made of plastic
- Grease up to NLGI class 2
Shipping time: 3-4 Weeks
Vogel Hydraulic lubrication pump - HS04
- Operating pressure lubricant: max. 120 bar
- Flow rate: 0,5 cm³ to 6,0 cm³
- Operating pressure hydraulic: 90 to 200 bar
- Operating temperature: -25 to +75°C
- Lubricant: NLGI-2
- Actuation via excavator hydraulic
Shipping time: 3-4 Weeks
Lubrication pump - hammers
- Supply: Hydraulic hammer cycle: 90-250 bar
- Differential pressure: min. 70 bar
- Per. back flow pressure: 20 bar
- Volume: 2 l/min
- Rotation speed: 1000 revs/min at 1,5 l/min
Shipping time: 3-4 Weeks
SKF Rotary piston pump - 206-100
- Rotary piston pump 206-100
- For clockwise or counter-clockwise rotation
- Constant delivery direction with changing rotation direction
Shipping time: 3-4 Weeks
Vogel Burst disc - PPU
- Burst disc
- For pneumatic pump (e.g. PPU5 and PPU 35)
Shipping time: 3-4 Weeks
| Show 1 to 33 (of in total 33 products) | Sites: 1 |