Complete Systems

Are you looking for a Complete System for your central lubrication of utility vehicles or systems?

We can offer the perfect solution for every application - oil and semi-fluid grease systems for central lubrication of industrial plants and systems or complete systems with grease for e.g. trucks or other heavy-duty utility vehicles.

Central lubrication system will dramatically shorten maintenance, lower personnel costs, prevent machine downtime or damage and improve the durability of your machines.

Perfectly tailored to your individual requirements, we offer the following complete systems with various equipment:

Oil central lubrication:

Oil centralized complete systems allow you to permanently and flawlessly lubricate your whole system which reduces wearing and therefore improves the durability of your machines.
Central lubrication is carried out electronically, pneumatically or manually for oil pump or pump unit. We offer a variety of oil pumps with various reservoir sizes and varying voltages ranging from 12 to 230 volt.
Oil is delivered to piston distributors via poly pipes by the pump in amounts according to pre-set, specific settings for your system to all lubricating points. If a lubricating point is sufficiently supplied, the increase in the system's pressure is monitored by pressure switches when then automatically shut down the system's pump unit.
Depending on place of operation and space requirements, brushes can be mounted to lubricate chains.
 

Grease central lubrication:

Just like central lubrication with oil, grease lubrication systems are customisable according to your application and individual requirements.
Grease lubrication should be used when lubricant drips are unwanted due to infrequent or slow movement of lubricated components. It is, however, not suitable for lubricating points moving with higher speeds as the grease would, compared to oil, heat too fast due to high viscosities and reach temperatures too high for lubrication.
A good and cost-efficicient alternative to grease lubrication with automated lubrication units is grease lubrication with a manual pump. It has to be made sure that al lubricating points are continuously supplied with sufficient amounts of lubricant, though.
We offer a great variety of pumps and pump units for automatic centralized lubrication with different reservoir volumes, voltage ranges and optional control units.
 

Lubrication nipple extension:

If your application includes hard-to-reach lubricating points in a smaller system, our lubricating nipple extensions are the perfect and cost-efficient solution for you. Extensions combine all lubricating points of a system into one central, easy to acces lubricating point where the lubricating pump or device is connected. The amount of work needed for supplying all lubricating points is significantly reduced, it is also safer since no lubricating point can be forgotten.
Depending on your fields of application for our system, lubricating nipple extensions can be build and used with either oil, semi-fluid grease or grease.

Specifications of different lubrication types: "Oil"

Industrial oils
ISO-VG
Mid-point viscosity mm²/s 40°C
Kin viscosity min. mm²/s 40°C
Kin viscosity max. mm²/s 40°C
2
2,2
1,98
2,42
3
3,2
2,88
6,52
5
4,6
4,14
5,06
7
6,8
6,12
7,48
10
10
9,00
11,00
15
15
13,50
16,50
22
22
19,80
24,20
32
32
28,80
35,20
46
46
41,40
50,60
68
68
61,20
74,80
100
100
90,00
110,00
150
150
135,00
165,00
220
220
198,00
242,00
320
320
288,00
352,00
460
460
414,00
506,00
680
680
612,00
748,00
1000
1000
900,00
1100,00
1500
1500
1350,00
1650,00

Specifications of different lubrication types: "Grease"

List of lubrication greases according to NLGI class

NLGI class

ASTM Walk Penetration
Appearance at room temperature
000
445-475
very liquid
00
400-430
liquid
0
355-385
semi-liquid
1
310-340
very soft
2
265-295
soft
3
220-250
semi-stiff
4
175-205
stiff
5
130-160
very stiff
6
85-115
extremely stiff