Abbildung kann vom Original abweichen

100-012 - High pressure hose Ø 11,3 mm - nominal pressure 840 bar - unfilled - price per meter

5,07 €

excl. 19% VAT , plus

Brutto: 6,03 €

incl. 19% VAT , plus

meter

AVAILABLE IMMEDIATELY

Request a offer

High-pressure hose
Inner diameter: 6.3 mm
Outer diameter: 11.3 mm
Empty (unfilled)
Operating pressure: 600–840 bar
Operating temperature range: -40°C to 80°C
Grease with corrosion inhibitor up to 70°C
Burst pressure per DIN EN ISO 1402 (pressure build-up 60 s): 20°C >840 bar, 60°C >460 bar
Inner hose made of thermoplastic polyamide 6
Tensile strength of inner hose: >30 N/mm² (DIN EN ISO 527)
Elongation at break of inner hose: >180% (DIN EN ISO 527)
Hardness of inner hose: >D 60 ± 3 (DIN EN ISO 868)
Sheath made of thermoplastic Polyurethane
Tensile strength of sheath: >18 N/mm² (DIN EN ISO 527)
Elongation at break of sheath: >380% (DIN EN ISO 527)
Hardness of sheath: >A 89 +/- 3 (DIN EN ISO 868)
Sold by the meter (maximum 100 meters per roll)

High-pressure hose
Inner diameter: 6.3 mm
Outer diameter: 11.3 mm
Empty (unfilled)
Operating pressure: 600–840 bar
Operating temperature range: -40°C to 80°C
Grease with corrosion inhibitor up to 70°C
Burst pressure per DIN EN ISO 1402 (pressure build-up 60 s): 20°C >840 bar, 60°C >460 bar
Inner hose made of thermoplastic polyamide 6
Tensile strength of inner hose: >30 N/mm² (DIN EN ISO 527)
Elongation at break of inner hose: >180% (DIN EN ISO 527)
Hardness of inner hose: >D 60 ± 3 (DIN EN ISO 868)
Sheath made of thermoplastic Polyurethane
Tensile strength of sheath: >18 N/mm² (DIN EN ISO 527)
Elongation at break of sheath: >380% (DIN EN ISO 527)
Hardness of sheath: >A 89 +/- 3 (DIN EN ISO 868)
Sold by the meter (maximum 100 meters per roll)

Product safety information

Manufacturer information:

Sinntec Schmiersysteme GmbH
Bahnhofstr. 14
Niedersachsen
Schwarmstedt, Deutschland, 29690
info@sinntec.de
https://www.sinntec.de